We will be happy to send you a quote for a Batscan system. Just fill in this form
and we will reply to you by e-mail.
Our reply will include pricing for a standard Batscan system based on the configuration of your batteries.
Under Special Requirements you may add any special requirements you may have for the Battery Monitoring System.
For example: One pilot cell temperature shall be measured in each string. IP65 enclosures
shall be used for all equipment located in the battery room.
Edit the List of batteries to be monitored to reflect the configuration of
your site. Each row describes one battery, you may specify up to 15 batteries.
Note that the term 'Battery' refers to a complete set of Strings x Block/Cells. A typical UPS Battery
may comprise 2 strings with 192 Cells in each.
(Some would say 'jar' instead of 'Block' and 'Bank' instead of 'String'.)
In the 'Battery Description' field you may enter any text that describes the battery.
For example: UPS#1 2x192 OPZs 2v400Ah
In the 'Strings in battery' field: enter the number of strings in the battery, usually between 1 and 8.
For example: 2
In the 'Block/Cells per string' field: enter the number of voltage measuring points per string, usually between 4 and 240.
For example: 192
A Block may comprise one or more cells, if individual cells cannot be measured you must enter the number of Blocks in a string.
When individual cells can be measured you may enter either number of Blocks OR number of Cells in a string.
Fill in your e-mail address and submit the form.